- Home /
- Ies Epoxies & Sealers /
- Coatings / Trim Paints /
- CAVITY WAX RUSTPROOFING WAND KIT
Shop Now
- Paint Selector
- Abrasives
- 3m
- Adhesives, Sealants & Tapes
- Air Tools
- Anest Iwata
- Baslac
- Brunox
- Brushware
- Carsystem
- Charts & Literature
- Concept-surface
- Dent Pullers
- Drills & Accessories
- Electrical
- Fasteners
- Files & Hacksaws
- Fillers & Spreaders
- Green Rhino
- Gys
- Ies Epoxies & Sealers
- Indasa
- Infrared Lights
- Knives/ Blades & Scrapers
- Lights
- Malco / Presta
- Masking Products
- Mbx Metal Blaster
- Measuring Tools
- Mipa
- Misc Fluids & Lubricants
- Misc Tools
- Pacer
- Pacer & Norbin Primers & Clears
- Paint Cups/ Strainers/ Tack
- Panelbeating Dollies & Hammers
- Plastic Repair
- Por 15
- Protective Gear
- Rubbers & Trims
- Stands
- Transtar
- Welding
Coatings / Trim Paints
CAVITY WAX RUSTPROOFING WAND KIT
IES 4556 WAND TUBE KIT (4 x 9" (22.86cm) Extension Tubes, 3 x Spray Buttons, 3 x Tube Connectors and 1 x 360 Degree Brass Spray Tip),This wand kit allows you to reach 36 inches (91.44 cm) into a blind panel and spray Inter-Guard in all directions to properly coat the entire cavity. When wand is assembled it is straight and can be inserted into the middle of the cavity so it is centered and coats the inner surfaces uniformly, where as other wand kits come to you coiled and curved and will not center. The wand kit also allows you to adjust the length of the wand by using just one 9" segment by itself or multiple segments and not use the 360 degree spray tip. Wand Kit can be cleaned with an aerosol solvent and be reused.