Body Fillers

SPRITZ SPRAY FILLER

Polyester Spray Putty

SPRAY is a very easy sanding two component spray filler with excellent adhesion to metal, polyester filler and GRP parts.

Colour: grey

All surfaces should be sanded before application. The filler has a balanced thixotrophy and excellent flow and filling properties enabling it to be applied over large areas filling both small and deeper imperfections (pinholes and sanding marks) easily.

The filler hardens to a pinhole free, dense and tack free surface which makes it easy to sand ( minimum paper clogging ). Do not use this product over a thermoplastic, acrylic system or paint primed surfaces.


Not for use on zinc and aluminium surfaces. CS Spray should not be applied to bare steel or Etch Primers

Application:
Gravity spray gun, needle size 2.5 mm diameter, working pressure 2 – 2.5 bar.


Hardening time:
Before sanding the product should be allowed to harden for 3-5 hours at an ambient temperature of approx. 20°C. Heat will shorten the hardening time whereas cold will lengthen it, i.e. the hardening time can be accelerated at higher temperatures approximately as follows:
Temperature: 40°C - Hardening time: 60 minutes
Temperature: 60°C - Hardening time: 30 minutes
Temperature: 80°C - Hardening time: 15 minutes

Downloads

Product Name Price Quantity
Code: V127978
CS SPRITZ POLYESTER SPRAY FILLER 1.5L
$44.85
Make an Enquiry

Related Products